Product ID:ISOPROPYL ALCOHOL
MSDS Date:11/04/1991
FSC:6810
NIIN:00-286-5435
MSDS Number: CCLQP

Emergency Phone: 713-473-9451

Info Phone: 713-241-2252

Cage: SHELL

Telephone: 713-241-2252 /713-241-4819

Cage: SHELL

ISOPROPYL ALCOHOL (SARA 313)

CAS: 67-63-0

RTECS: NT8050000

Fraction By Weight: 100%

OSHA PEL 400 PPM

ACGIH TLV: 400 PPM/500STEL;9596

LD50 LC50 Mixture:ORAL LD50 (RAT) = 5840 MG/KG
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: OVEREXPOSURE MAY LEAD TO
CENTRAL NERVOUS SYSTEM DEPRESSION, LEADING TO HEADACHES AND
DIZZINESS. EYE: MAY LEAD TO IRRITATION AND WILL INJURE EYE TISSUE
IF NOT REMOVED PROMPTLY. SKIN: MAY LEAD TO DERMATITIS. INGESTION:
MAY LEAD TO VOMITING. CHRONIC: PROLONGED SKIN CONTACT MAY CAUSE
DERMATITIS.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
CARCINOGENS.
Effects of Overexposure:OVEREXPOSURE MAY LEAD TO DIZZINESS, HEADACHES,
DERMATITIS AND EYE IRRITATION. HIGH VAPOR CONCENTRATIONS ARE
ANESTHETIC AND MAY HAVE OTHER CENTRAL NERVOUS SYSTEM EFFECTS.
Medical Cond Aggravated by Exposure:PERSONS WITH SKIN, HEART,
RESPIRATORY, OR ANY OTHER MEDICAL CONDITION SHOULD USE CAUTION WHEN
HANDLING OR USING THIS PRODUCT.

First Aid:SKIN: IMMEDIATELY FLUSH WITH SOAP AND WATER. GET MEDICAL
ATTENTION IF NECESSARY. INHALATION: IMMEDIATELY REMOVE VICTIUM TO
FRESH AIR. GIVE CPR IF BREATHING IS STOPPED. GET MEDICAL ATTENTION.
EYE: IMME DIATELY FLUSH WITH WATER FOR 15 MINUTES.GET MEDICAL
ATTENTION. INGESTION: GET PROMPT MEDICAL ATTENTION. DO NOT INDUCE
VOMITING. KEEP AT REST.

Flash Point Method:TCC
Flash Point:=11.7C, 53.F
Lower Limits:2.0
Upper Limits:12.0
Extinguishing Media:WATER FOG, "ALCOHOL" FOAM, DRY CHEMICAL OR CO2.
Fire Fighting Procedures:CLEAR FIRE AREA OF UNPROTECTED PERSONNEL. DO
NOT ENTER CONFINED AREA W/OUT FULL BUNKER GEAR AND NIOSH SCBA. COOL
FIRE EXPOSED CONTAINERS WITH WATER.
Unusual Fire/Explosion Hazard:CONTAINERS EXPOSED TO INTENSE HEAT FROM
FIRES SHOULD BE COOLED WITH WATER TO PREVENT VAPOR PRESSURE BUILDUP
WHICH CAN CAUSE RUPTURE. COOL WITH WATER.

Spill Release Procedures:MINOR: ABSORB MATERIAL WITH CLAY, VERMICULITE,
OR SIMILAR ABSORBENT MATERIAL. PLACE IN DISPOSAL CONTAINERS. MAJOR:
DIKE & CONTAIN SPILL. ELIMINATE SOURCES OF IGNITION. SHUT OFF
LEAKS. REMOVE LIQUID BY VACUUM OR ABSORBENT. FLUSH RESIDUE
WITHWATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:USE ONLY IN WELL VENTILATED WORK AREA.
KEEP CONTAINERS CLOSED WHEN NOT IN USE. FLAMMABLE LIQUID; EMPTY
CONTAINERS CAN CONTAIN LIQUID/VAPOR RESIDUE.
Other Precautions:DO NOT PRESSURIZE, CUT, WELD, BRAZE, SOLDER, DRILL,
GRIND, OR EXOPSE SUCH CONTAINERS TO HEAT, FLAME, SPARKS, STATIC
ELECTRICITY, OR OTHER SOURCES OF IGNITION. EXPLOSION HAZARD. EMPTY
DRUMS SHOULD BE C OMPLETELY DRAINED, BUNGED & DISPOSED OF.

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR. AIR-SUPPLIED
OR FILTERING TYPE WITH ORGANIC VAPOR CARTRIDGES ARE RECOMMENDED.
Ventilation:LOCAL AND MECHANICAL EXHAUST RECOMMENDED. AVOID OPEN
ELECTRICAL SOURCES NEAR PRODUCT VAPOR AREAS.
Protective Gloves:NEOPRENE, NITRILE, OR POLYVINYL ALCOHOL
Eye Protection:USE CHEMICAL SAFETY GOGGLES & FACESHIELD
Other Protective Equipment:SAFETY SHOES, EYE WASH STATION & SAFETY
SHOWER.
Work Hygienic Practices:DO NOT TAKE INTERNALLY. AVOID SKIN CONTACT.
WASH SKIN AFTER USING PRODUCT. DO NOT EAT, DRINK OR SMOKE IN WORK
AREA.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:F2
Boiling Pt:=82.2C, 180.F
Melt/Freeze Pt:=-88.3C, -127.F
Vapor Pres:33
Vapor Density:2.1
Spec Gravity:0.79
Evaporation Rate & Reference:1.4 N-BUTYL ACETATE
Solubility in Water:COMPLETE
Appearance and Odor:COLORLESS,MOBIL LIQUID,MILD ODOR
Percent Volatiles by Volume:100

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, ALUMINUM EQUIPMENT FOR STORAGE AND HANDLING.
Stability Condition to Avoid:HEAT, SPARKS, FLAME AND CONTACT WITH
STRONG OXIDIZING AGENTS. KEEP TEMPS. BELOW 120F AND AWAY FROM
ALUMINUM PRODUCTS.
Hazardous Decomposition Products:CARBON MONOXIDE AND UNIDENTIFIED
ORGANIC COMPOUNDS MAY BE FORMED DURING COMBUSTION.

Waste Disposal Methods:DISPOSE OF ALL WASTE IN ACCORDANCE WITH LOCAL,
STATE AND FEDERAL REGULATIONS. INCINERATION IS RECOMMENDED.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.